solar inverter transformers
Solar inverter transformers
power transformer
Our Products
1
1
Power Supply Transformer

Power Transformer


Here you find a selection of our Three Phase Power Transformer designed and manufactured by Synergy Transformers. We produce power electrical transformers of capacity up to 50 MVA, 3 Phase, up to 132 KV Class, ONAN/ONAF/OFAF/OFWF Cooling. Our transformers are popular for its trouble free long performance, reliability and very competitive prices.

About Power Transformer:

Power transformers are designed to be used for step-up and step down application in the transmission network of higher voltages like 400 kV, 200 kV, 110 kV, 66 kV, 33kV, etc. The transformers are generally rated 200MVA and above. The designing make the transformers 100% efficient in transmitting heavy load and high voltage i.e., higher than 33 KV. If compared to the size of the distribution transformers, these transformers are bigger and are used in transmission substation, generating station and application areas requiring high insulation level.

As these transformers are designed for applications in Transmission Network, thus there is no direct connection with the consumers. Therefore, fluctuations in load are fewer. The transformer is fully loaded 24 hr’s a day, and therefore, throughout the day, Fe losses and Cu losses takes place. The specific Cu weight and Fe weight is very less. These transformers are designed to perform with full efficiency and the average load recorded is near to full load. As these are not dependant on time, so power is considered for the calculation of the efficiency.

These transformers seek its application in the Distribution Network and thus, are directly connected to the consumer, resulting in high load fluctuations. Being fully loaded entire day, simultaneously iron losses takes place. But the Cu loss is only at the load cycle. The Fe weight and Cu weight is high, the average load in only 75% of full load. The designing of the transformer supports to ascertain maximum efficiency at 75% of full load. These are dependent on time for entire day and hence, the efficiency is calculated accordingly.

1
Specification of Three Phase Power Transformer:
1
  • Up to 50 MVA
  • 3 Phase
  • Up to 132 KV Class
  • ONAN/ONAF/OFAF /OFWF Cooling
Specific Features of Electrical Power Transformers:
1
  • Provides a long trouble-free performance
  • Low power loss and low noise
  • Designed to withstand electrical impulses and thermal and dynamic stresses
  • Made of high grade components
  • Advanced manufacturing techniques ensure cost effectiveness and reliability
1
Application Areas of Power Electrical Transformer:
1
  • Power Station
  • Distribution Network
  • Transmission Network
  • Transmission Substation
  • Generating Station
  • Areas Requiring High Insulation Level
Uses of 3 Phase Power Transformer:
1
  • Step-up and step down application in the transmission network of higher voltages like 400 kV, 200 kV, 110 kV, 66 kV, 33kV, etc.
1

Solar Inverter Transformers

Synergy Transformers are the leader in manufacturing industry designing high grade solar inverter transformers as per customer needs and requirements. Our standard range of transformers comes of capacity from 500 KVA to 3 MVA. Till a value of 33Kv class, our solar inverter transformers are immensely appreciated due to its maximum efficiency and negligible maintenance costs.

About Solar Inverter Transformer:

power supply transformer
Hydro Power Plant
11KV transformers
Coal Power Plant
Solar inverter transformers
Solar Power Plant
Contact Synergy Transformers
1
Synergy Transformers
"Diksha Parva"
Maheshwar Madhi Main Road, Pipaliya Nagar,
Mangrol Road, Keshod.
Dist: Junagadh. (Gujarat) INDIA

Phone : +91 02871 231791
+91 02871 253077
+91 02871 299555
E-Mail : info@synergytransformers.com
Web : www.synergytransformers.com
Sitemap
1
Our Products
1